Prediction of mechanical properties of cement paste at microscale

Authors

  • Z. Qian Microlab, Faculty of Civil Engineering and Geosciences, Delft University of Technology
  • E. Schlangen Microlab, Faculty of Civil Engineering and Geosciences, Delft University of Technology
  • G. Ye Microlab, Faculty of Civil Engineering and Geosciences, Delft University of Technology
  • K. van Breugel Microlab, Faculty of Civil Engineering and Geosciences, Delft University of Technology

DOI:

https://doi.org/10.3989/mc.2010.55209

Keywords:

3D Lattice Modeling, Fracture Process Simulation, Cement Paste, Microscale, Mechanical Properties Prediction

Abstract


Prediction of the mechanical properties of cement paste at microscale has been done in this contribution by making use of 3D lattice fracture model. The microstructure of cement paste is simulated by HYMOSTRUC3D first, which is represented in terms of sphere particles. Then the microstructure is converted into a voxel-based image, and a lattice system is constructed based on the image of the microstructure through ImgLat (Image to Lattice). A virtual uni-axial tensile test is configured and the fracture process is simulated by GLAK (Generalized Lattice Analysis Kernel). The outputs of fracture process simulation are the load-displacement diagram and micro-cracks propagation. The load-displacement diagram reveals the tensile behavior of cement paste at microscale, from which the elastic modulus and tensile strength can be obtained. A numerical experiment is carried out to show how the model works, and the final results also demonstrate the feasibility of the above modeling procedure.

Downloads

Download data is not yet available.

References

(1) Schlangen, E.: “Experimental and Numerical Analysis of Fracture Processes in Concrete”, PhD Thesis, Delft University of Technology, Delft (1993).

(2) Qian, Z.: “3D Lattice Analysis of Cement Paste”, MSc Thesis, Delft University of Technology, Delft (2008).

(3) Lilliu, G.: “3D Analysis of Fracture Processes in Concrete”, PhD Thesis, Delft University of Technology, Delft (2007).

(4) Bernard, F.; Kamali-Bernard, S.; Prince, W.: “3D Multi-scale Modelling of Mechanical Behaviour of Sound and Leached Mortar”, Cem. Concr. Res., vol. 38 (2008), pp. 449-458. doi:10.1016/j.cemconres.2007.11.015

(5) Van Breugel, K.: “Simulation of Hydration and Formation of Structure in Hardening Cement-Based Materials”, PhD Thesis (2nd Edition), Delft University of Technology, Delft (1997).

(6) Ye, G.: “The Microstructure and Permeability of Cementitious Materials”, PhD Thesis, Delft University of Technology, Delft (2003).

(7) Qian, Z.; Ye, G.; Schlangen, E.; van Breugel, K.: “Tensile Behavior Prediction of Cement Paste using 3D Lattice Model”, in Proceedings of the 12th International Conference on Fracture, Ottawa, Canada (2009).

(8) Sanahuja, J.; Dormieux, L.; Chanvillard, G.: “Modelling Elasticity of a Hydrating Cement Paste”, Cem. Concr. Res., vol. 37 (2007), pp. 1427-1439. doi:10.1016/j.cemconres.2007.07.003

(9) Manzano, H.; Dolado, J. S.; Ayuela, A.: “Elastic Properties of the Main Species present in Portland Cement Pastes”, Acta Materialia, vol. 57 (2009), pp. 1666-1674. doi:10.1016/j.actamat.2008.12.007

(10) Manzano, H.; Dolado, J. S.; Guerrero, A.; Ayuela, A.: “Mechanical Properties of Crystalline Calcium-Silicate-Hydrates: Comparison with Cementitious C-S-H Gels”, Phys. Stat. Sol., vol. 204 (2007), pp. 1775-1780. doi:10.1002/pssa.200675359

(11) Schlangen, E.; Qian, Z.; Sierra-Beltran, M. G.; Zhou, J.: “Simulation of Fracture in Fibre Cement based Materials with a micromechanical lattice model”, in Proceedings of the 12th International Conference on Fracture, Ottawa, Canada (2009).

(12) Bolander, J. E.; Sukumar, N.: “Irregular Lattice Model for Quasistatic Crack Propagation”, Physical Review B, vol. 71 (2005), 094106. doi:10.1103/PhysRevB.71.094106

(13) Schlangen, E.; Garboczi, E.: “Fracture Simulations of Concrete using Lattice Models: Computational Aspects”, Engineering Fracture Mechanics, vol. 57, nº 2/3 (1997), pp. 319-332. doi:10.1016/S0013-7944(97)00010-6

(14) Qian, Z.; Schlangen, E.; Ye, G.; van Breugel, K.: “Parallel Implementation of Three-dimensional Lattice Fracture Analysis on a Distributed Memory Architecture”, In Proceedings of the First International Conference on Parallel, Distributed and Grid Computing for Engineering, Topping, B. H. V.; Iványi, P. (Editors), Civil-Comp Press, Stirlingshire, United Kingdom, paper 34 (2009).

(15) Qian, Z.; Ye, G.; Schlangen, E.: “Simulation of 3D Cracks Propagation in Cement Paste”, in Proceedings of the ConMod08, Delft, the Netherlands (2008).

Downloads

Published

2010-03-30

How to Cite

Qian, Z., Schlangen, E., Ye, G., & van Breugel, K. (2010). Prediction of mechanical properties of cement paste at microscale. Materiales De Construcción, 60(297), 7–18. https://doi.org/10.3989/mc.2010.55209

Issue

Section

Research Articles