Utilisation of Sepidrud dam basin sediments in fired clay bricks: laboratory scale experiment

Authors

  • R. Jamshidi-Chenari The University of Guilan
  • H. Rabanifar Building and Housing Research Center
  • S. Veiseh Building and Housing Research Center

DOI:

https://doi.org/10.3989/mc.2015.07014

Keywords:

Sepidrud Dam, Basin sediments, Clay brick, Dune sand, Sawdust

Abstract


The prevailing disposal methods for dam basin sediments are not free from the environmental pollution and the ecological imbalance. At present, a new way to treat the dredged sediments to manufacture bricks is being investigated, prioritizing waste recovery over its deposition in landfills. However, construction materials such as clay bricks must comply with the international and local standards. Considering the perpetual availability of the sediments, particle sizing and their chemical composition and the results of physical and qualification tests on Sepidrud Dam basin sediments it can be concluded that the utilization of basin sediments as a full or partial replacement in clay brick production will lead to the production of quality bricks that meet all the regulatory limits in the standards. This research is novel in view of both increasing the reservoir effective volume capacity and preventing the use of alternative land quarries which are mainly covered by green land.

Downloads

Download data is not yet available.

References

1. Ashraf Vaghefi, S.; Banihashemi, M.A.; Rahmanian, M.R. (2008) Flushing effect on rehabilitation of dam basins (Case study: Sepidrud Dam). Second National Conference on Dam and Hydropower, Tehran, Iran.

2. Lingling, X.; Wei, G.; Tao. W.; Nanru, Y. (2005) Study on fired clay bricks with replacing clay by fly ash in high volume ratio. Construct. Build Mater. 19, 243–247. http://dx.doi.org/10.1016/j.conbuildmat.2004.05.017

3. Menezes, R.; Ferreira, H.S.; Neves, G.A.; Lira de, L.H.; Ferreira, H.C. (2005) Use of granite sawing wastes in the production of ceramic bricks and tiles. J. Eur. Ceram. Soc. 25, 1149–1158.

4. Domínguez, E.A.; Ullmann, R. (1996) Ecological bricks made with clays and steel dust pollutants. J. Appl. Clay Sci. 11 [2], 237–249. http://dx.doi.org/10.1016/S0169-1317(96)00020-8

5. Demir, I.; Orhan, M. (2003) Reuse of waste bricks in the production line. J. Build Environ. 38, 1451–1455. http://dx.doi.org/10.1016/S0360-1323(03)00140-9

6. Turgut, P.; Murat Algin, H. (2007) Limestone dust and wood sawdust as brick material. J. Build Environ. 42, 3399–3403. http://dx.doi.org/10.1016/j.buildenv.2006.08.012

7. Liew, A.G.; Idris, A.; Samad, A.A.; Wong, C.H.K.; Jaafar, M.S.; Baki, A.M. (2004) Reusability of sewage sludge in clay bricks. Springer-Verlag, J. Mater. Cycles Waste Manage 6, 41–47. http://dx.doi.org/10.1007/s10163-003-0105-7

8. Lin, D.F.; Weng, C.H. (2001) Use of sewage sludge ash as brick material. J. Environ. Eng. 127, 922-927.

9. Weng, C.H.; Lin, D.F.; Chiang, P.C. (2003) Utilization of sludge as brick materials. J. Adv. Environ. Res. 7, 679–685.

10. Anderson, M.; Elliott, M.; Hickson, C. (2002) Factory scale trials using combined mixtures of three by-product wastes (including incinerated sewage sludge ash) in clay building bricks. J. Chem. Technol. Biotechnol. 77, 345–351.

11. Anderson, M.; Glynn Skerratt, R.; Thomas, J.P.; Clay, S.D. (1996) Case study involving using fluidised bed incinerator sludge ash as a partial clay substitute in brick manufacture. J. Water Sci. Technol. 34, 195–205.

12. Wiebusch, B.; Ozaki, M.; Watanabe, H.; Seyfried, C.F. (1998) Assessment of leaching tests on construction material made of incinerator ash (sewage sludge) Investigations in Japan and Germany. J. Water Sci. Technol. 38, 195–205.

13. Demir, I. (2006) An investigation on the production of construction brick with processed waste tea. J. Build Environ. 41, 1274–1278. http://dx.doi.org/10.1016/j.buildenv.2005.05.004

14. Huang, C.; Pan, J.R.; Liu, Y. ( 2005) Mixing water treatment residual with excavation waste soil in brick and artificial aggregate making. J. Environ. Eng. 131 [2].

15. Hamer, K.; Karius, V. (2002) Brick production with dredged harbour sediments. An industrial-scale experiment. Waste Manage 22, 521–530. http://dx.doi.org/10.1016/S0956-053X(01)00048-4

16. Hsu, Y.S.; Lee, B.J,; Liu, H. (2003) Mixing reservoir sediment with fly ash to make bricks and other products. International Ash Utilisation Symposium, Center for Applied Energy Res. University of Kentucky.

17. Samara, M.; Lafhaj, Z.; Chapiseau, C. (2009) Valorization of stabilized river sediments in fired clay bricks: Factory scale experiment. J. Hazard Mater 163, 701–710. http://dx.doi.org/10.1016/j.jhazmat.2008.07.153

18. Khodabandeh, N.; Veiseh, S. (1994) Utilization of Sepidrud Dam basin sediments in building materials. Research Report, BHRC Publication 206.

19. Sharafi, H. (2010) Production of LECA by mixing Sepidrud dam basin sediments. In partial fulfillment of the requirements the degree of Master of Science, Faculty of Eng., The Univ. of Guilan, Guilan, Iran.

20. ASTM D422, Standard Test Method for Particle-Size Analysis of Soils, Annual Book of ASTM Standards Vol 04.08.

21. ASTM D4318, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils, Annual Book of ASTM Standards Vol 04.08.

22. ASTM D427, Standard Test Method for Shrinkage Factors of Soils by the Mercury Method, Annual Book of ASTM Standards, Vol 04.08.

23. Mehra, O.P.; Jackson, M.L. (1960) Iron oxide removal from soils and clays by a dithionite citrate system with sodium bicarbonate. Clays and Clay Minerals 7, 317–327. http://dx.doi.org/10.1346/CCMN.1958.0070122

24. Kittrick, J.A.; Hope, E.W. (1963) A procedure for the particle size separation of soils for X-ray diffraction analysis. Soil Sci. 96, 312–325. http://dx.doi.org/10.1097/00010694-196311000-00006

25. Jackson, M.L. (1975) Soil Chemical Analysis. Advanced Course. University of Wisconsin, College of Agriculture, Department of Soils, Madison, Wisconsin, USA.

26. Johns, W.D.; Grim, R.E.; Bradley, F. (1954) Quantitative estimation of clay minerals by diffraction methods. J. Sediment. Res. 24, 242–251.

27. ISIRI 1162, Soil for making clay brick-Specifications and test methods, 2nd rev.

28. Haines, W.B. (1923) The volume changes associated with variations of water content in soil. J. Agric. Sci. 13, 296–311.

29. Strik, G.B. (1954) Some aspects of soil shrinkage and the effect of cracking upon air entry into the soil. Aust. J. Soil. Res. 5, 279–290.

30. Sridharan, A.; Prakash, K. (1998) Mechanism Controlling the Shrinkage Limit of Soils. Geotechnical Testing J. 21, 240–250. http://dx.doi.org/10.1520/GTJ10897J

31. ASTM C67-87, Standard Test Method for Sampling and Testing Brick and Structural Clay Tile.

32. ASTM C62-05, Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale ), Annual Book of ASTM Standards Vol 04.05.

33. Veiseh, S.; Khodabandeh, N. (2003) Lightweight brick with the use of sawdust. BHRC Publication No. R-368.

Published

2015-12-30

How to Cite

Jamshidi-Chenari, R., Rabanifar, H., & Veiseh, S. (2015). Utilisation of Sepidrud dam basin sediments in fired clay bricks: laboratory scale experiment. Materiales De Construcción, 65(320), e066. https://doi.org/10.3989/mc.2015.07014

Issue

Section

Research Articles