The adherence in the union stone-mortar
DOI:
https://doi.org/10.3989/mc.1994.v44.i234.586Abstract
Stones placates present a wide of problems that result in the fall of plates. One of the causes is the lack of adherence stone-mortar. We considered a study to determine the adherence between several cement mortars (1:3, 1:5, 1:7, 1:9 and a especial mortar prepared with latex) and stones (white granite, pink granites, black granites, white marble and cream limestones). The results obtained suggest that only adequate adherence rates (higher than 3 kgf/cm2) achieved with cement mortar 1:3 and especial mortar. Besides it is observed that in the stones studied there is no relation between adherence and the absorption values.
Downloads
Download data is not yet available.
Downloads
Published
1994-06-30
How to Cite
Rodríguez García, M. R., Pereda Marín, J., Polo Velasco, J., & Barrios Sevilla, J. (1994). The adherence in the union stone-mortar. Materiales De Construcción, 44(234), 13–27. https://doi.org/10.3989/mc.1994.v44.i234.586
Issue
Section
Research Articles
License
Copyright (c) 1994 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
