Use of bottom ash from thermal power plant and lime as filler in bituminous mixtures
DOI:
https://doi.org/10.3989/mc.2015.01614Keywords:
Waste treatment, Lime, Filler, Mixture proportion, Mechanical propertiesAbstract
This study focuses on the characterization of bottom ash (PCC-BA) and determining the mechanical characteristics of hot mix asphalt (HMA) using PCC-BA and hydrated lime (HL) as filler. Physical and chemical characterization of the bottom ash was carried out to evaluate its eventual reutilization as filler substitute. The materials tested in this study were made using 0%, 25%, 50%, 70% and 100% of PCC-BA combined with HL. HMA mixes were evaluated in terms of their engineering properties, namely: air voids in the mixes, water sensitivity, stiffness modulus, performance in wheel tracking test and fatigue resistance. The results obtained indicate that HMA mixes with a filler blend of 70% PCC-BA and 30% HL fulfil European standards and are suitable for light traffic or small infrastructures.
Downloads
References
1. International Energy Agency (IEA) (2009) Key world energy statistics.
2. American Coal Ash Association (ACAA) (2010) 2008 Coal combustion product (CCP) production and use survey report.
3. Vega-Zamanillo, A.; Calzada-Pérez, M.A.; Pascual-Montejo, I.; Hernández-Sanz, A. (2008) Compactación y capacidad portante de cenizas de central térmica en terraplenes de carreteras. Revista Carreteras de la Asociación Espa-ola de la Carretera 161, 45–53.
4. Forteza, R.; Far, M.; Seguí, C.; Cerdá, V. (2004) Characterization of bottom ash in municipal solid waste incinerators for its use in road base. Waste management 24 [9], 899–909. http://dx.doi.org/10.1016/j.wasman.2004.07.004 PMid:15504667
5. Ogunro, V.O.; Inyang, H.I.; Hooper, F.; Young, D.; Oturkar, A. (2004) Gradation control of bottom ash aggregate in superpave bituminous mixes. Journal of Materials in Civil Engineering 16 [6], 604–613. http://dx.doi.org/10.1061/(ASCE)0899-1561(2004)16:6(604)
6. Huang, C.M.; Chiu, C.T.; Li, K.C.; Yang, W.F. (2006) Physical and environmental properties of asphalt mixtures containing incinerator bottom ash. Journal of Hazardous Materials 137 [3], 1742–1749. http://dx.doi.org/10.1016/j.jhazmat.2006.05.016 PMid:16787702
7. Goh, S.W.; You, Z. (2008) A preliminary study of the mechanical properties of asphalt mixture containing bottom ash. Canadian Journal of Civil Engineering 35 [10], 1114–1119. http://dx.doi.org/10.1139/L08-071
8. Chen, Jian-Shiuh; Chu, Po-Yen; Chang, Juu-En; Lu, Hsing-Cheng; Wu, Zen-How; Lin, Kuei-Yi. (2008) Engineering and environmental characterization of municipal solid waste bottom ash as aggregate substitute utilized for asphalt concrete. Journal of Materials in Civil Engineering 20 [6], 432–439. http://dx.doi.org/10.1061/(ASCE)0899-1561(2008)20:6(432)
9. Kandhal, P.S. (1992) Waste materials in hot mix asphalt - an overview. NCAT Report No. 92–6, 1–11.
10. Vassiliadou Churchill, E.; Amirkhanian, S.N. (1999) Coal ash utilization in asphalt concrete mixtures. Journal of Materials in Civil Engineering 11 [4], 295–301. http://dx.doi.org/10.1061/(ASCE)0899-1561(1999)11:4(295)
11. Mohammad, L.N.; Abadie, C.; Gokmen, R.; Puppala, A.J. (2000) Mechanistic evaluation of hydrated lime in hot mix asphalt mixtures. Journal of the Transportation Research Board 1723/2000, 26–36. http://dx.doi.org/10.3141/1723-04
12. Sebaaly, P.E.; Little, D.N.; Epps, J.A. (2006) The benefits of hydrated lime in hot mix asphalt. National Lime Association.
13. Zeng, M.; Ksaibati, K. (2003) Evaluation of moisture susceptibility of asphalt mixtures containing bottom ash. Journal of the Transportation Research Board 1832/2003, 25–33. http://dx.doi.org/10.3141/1832-04
14. Sacramento Aragão, F.T.; Lee, J.; Kim, Y.R.; Karki, P. (2009) Material specific effects of hydrated lime on the properties and performance behavior of asphalt mixtures and asphaltic pavements. Constr. Build. Mater. 24 [4], 538–544. http://dx.doi.org/10.1016/j.conbuildmat.2009.10.005
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
