Predicting time to failure in bending of wood particleboards under cyclic humidity conditions
DOI:
https://doi.org/10.3989/mc.1992.v42.i225.719Abstract
Time to failure tests under constant load (30, 40, 50 and 60 % stress levels) were conducted on four different 19 mm thick particleboards with three layers. Two of them were uncoated (UF and MUF bonded) and the rest were melamine (80 g/m2) and veneer (Mukally) overlaid. Tests were carried out in cyclic humidity conditions (30 % - 90 %), at 20º C, 7 days at each condition. Time to failure was recorded, fitting mathematical models to predict time to failure. Melamine coating reduces predicting errors and increases time to failure.
Downloads
Download data is not yet available.
Downloads
Published
1992-03-30
How to Cite
Fernández-Golfín Seco, J. I., & Díez Barra, M. R. (1992). Predicting time to failure in bending of wood particleboards under cyclic humidity conditions. Materiales De Construcción, 42(225), 31–36. https://doi.org/10.3989/mc.1992.v42.i225.719
Issue
Section
Research Articles
License
Copyright (c) 1992 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
