Free lime quantitative determination by X ray diffraction, on anhiydrous and dried cement
DOI:
https://doi.org/10.3989/mc.1987.v37.i207.862Abstract
In manufactured cements, and concerning the quality control, the fast determination of the contents of free lime is a necessary step. The measurement of the content is made taking the net altitude of one peak of the DRX which, on each case, is peculiar to the compound to be determined. So, a calibrating curve is drawn, using there synthetic samples prepared with original cement with addition of 1%, 3% and 5% in weight of calcium oxide prepared fusing at 1100 °C for two hours a Merkc precipitate calcium carbonate. This calibrating curve allows to know the free lime content in original cement, when the results obtained by X ray diffraction is carried to the calibrating curve.
Downloads
Download data is not yet available.
Downloads
Published
1987-09-30
How to Cite
Sagrera, J. L. (1987). Free lime quantitative determination by X ray diffraction, on anhiydrous and dried cement. Materiales De Construcción, 37(207), 51–55. https://doi.org/10.3989/mc.1987.v37.i207.862
Issue
Section
Research Articles
License
Copyright (c) 1987 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.