Alkaline-sulphate activation processes of a Spanish blast furnace slag
DOI:
https://doi.org/10.3989/mc.1996.v46.i241.538Abstract
Alkaline-sulphate activation processes of a Spanish granulated blast furnace slag (Avilés, Ensidesa) have been studied. Activator solutions used were: deionized water (as reference solution), Ca(OH)2 (3,5∙10-3N), NaOH (1N), Na2CO3 (2N), CaSO4∙2H2O (3,0∙10-3N) at 25ºC. The influence of the nature of alkaline or sulphate solution cation on slag activation process was verified. Sodium solutions decrease the induction period while calcium solutions increase it. Slag reaction degree was also determined, likewise the nature of the different reaction products formed as a function of the activator solution nature.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1996 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read here the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
