Manganese substitutions into the portland cement clinker phases

Authors

  • F. Puertas ICCET/CSIC
  • M. Teresa Blanco ICCET/CSIC
  • T. Vázquez ICCET/CSIC

DOI:

https://doi.org/10.3989/mc.1989.v39.i214.806

Abstract


The effect of manganese substitution into the crystal structures of the main Portland cement clinker phases (3CaO.SiO2, 2CaO.SiO2, 3CaO.Al2O3, 2CaO.Fe2O3 y 4CaO.Al2O3.Fe2O3) has been studied by X-ray and analytical electron microscopy. In oxidizing conditions, the limit of solid solution in 3CaO.SiO2 is about 0.72 ±0.11% (wt), while in 2CaO.SiO2 is 1.53±0,12%(wt). Mn solid solubility on 3CaO.Al2O3structure, in oxidizing conditions is close to 0.78 ± 0,12% (wt). In identical atmosphere, the proportion of Mn in the ferrite phases (2CaO.Fe2O3 and 4CaO.Al2O3.Fe2O3) is 6.80 ± 0.87% (wt) and 6.7% (wt), respectively. To each mentioned clinker phases a solid solution formula has been proposed. In these formula, the manganese substitutions and also the different oxidation states which this element can be introduced in those crystalline structure are defined.

Downloads

Download data is not yet available.

Downloads

Published

1989-06-30

How to Cite

Puertas, F., Blanco, M. T., & Vázquez, T. (1989). Manganese substitutions into the portland cement clinker phases. Materiales De Construcción, 39(214), 19–30. https://doi.org/10.3989/mc.1989.v39.i214.806

Issue

Section

Research Articles

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 > >>