The efect of calcareous filler on portland cement mortars
DOI:
https://doi.org/10.3989/mc.1993.v43.i229.661Abstract
The present paper deals with the influence that the addition of calcareous "fillers" to a Portland cement has on the mechanical resistances of its mortars. Taking as a basis a Portland cement to which calcareous "fillers", from 0 up to 50 percent, are added, test tubes of standardized mortars were prepared. After 7, 28 and 90 days of curing, the test tubes were submitted to breaking following flexotraction and compression; their mechanical resistances were then determined and a correlation between these and the contents of calcareous "fillers" was established. An X-ray diffracting study was also carried out on the mortars obtained.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1993 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read here the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
