Unidades de mampostería de hormigón ligero basado en granulado procesado de la mazorca de maíz como árido
DOI:
https://doi.org/10.3989/mc.2015.04514Palabras clave:
Hormigón, Ladrillos, Materia prima orgánica, Tratamiento de residuos, Resistencia a compresiónResumen
En este trabajo de investigación se evaluó la posible aplicación de granulado procesado de la mazorca de maiz como un árido ligero alternativo en el proceso de fabricación de unidades de mampostería de hormigón ligero. Con esta finalidad, se prepararon en una fábrica diversas unidades de mampostería no estructural con granulado procesado de la mazorca de maiz. Además, se fabricaran unidades de mampostería estándar de peso ligero basado en agregados de arcilla expandida. Este trabajo experimental permitió lograr un conjunto de resultados que sugieren que el producto de construcción propuesto presenta interesantes propiedades materiales en el contexto de la pared de mampostería. Por lo tanto, esta solución es prometedora tanto para aplicaciones interiores y exteriores. Esta conclusión es aún más relevante teniendo en cuenta que la mazorca de maíz es un producto de desecho agrícola.
Descargas
Citas
1. Younquist, J.; English, B.; Spelter, H.; Chow, P. (1993) Agricultural fibers in composition panels. In: Proceedings of the 27th international particleboard/composite materials symposium, 1993 March 30–31, Pullman, WA: Washington State University, 133–52.
2. Chow, P. (1974) Dry formed composite board from selected agricultural residues. World consultation on wood based panels. New Delhi, India: Food and Agriculture Organization of the United Nations.
3. Lertsutthiwong, P.; Khunthon, S.; Siralertmukul, K.; Noomun, K.; Chandrkrachang, S. (2008) New insulating particleboards prepared from mixture of solid wastes from tissue paper manufacturing and corn peel. Bioresource Technology 99 [11], 4841–4845. http://dx.doi.org/10.1016/j.biortech.2007.09.051 PMid:17977719
4. Khedari, J.; Nankongnab, N.; Fotios, S. (2008) Agricultural waste materials as thermal insulation for dwellings in Thailand: preliminary results. In: PLEA 2008: 25th conference on passive and low energy architecture, Dublin, 22nd–24th October 2008.
5. Stone, N. (2003) Thermal performance of straw bale wall systems. Ecological Building Network (EBNet), October 2003, 1–7.
6. Pinto, J.; Paiva, A.; Varum, H.; Costa, A.; Cruz, D.; Pereira, S.; Fernandes,L.; Tavares, P.; Agarwal, J. (2011) Corn's cob as a potential ecological thermal insulation material. Energy Buildings 43 [8], 1985–1990. http://dx.doi.org/10.1016/j.enbuild.2011.04.004
7. Statistic Division of the Food and Agriculture Organization of the United States (2014) Retrieved October 3, 2014, from http://faostat3.fao.org/faostat-gateway/go/to/download/
8. Pinto, J.; Cruz, D.; Paiva, A.; Pereira, S.; Tavares, P.; Fernandes, L.; Varum, H. (2012) Characterization of corn cob as a possible raw building material. Constr. Build. Mater. 34, 28–33. http://dx.doi.org/10.1016/j.conbuildmat.2012.02.014
9. Faustino, J.; Pereira, L.; Soares, S.; Cruz, D.; Paiva, A.; Varum, H.; Ferreira, J.; Pinto, J. (2012). Impact sound insulation technique using corn cob particleboard. Constr. Build. Mater. 37, 153–159. http://dx.doi.org/10.1016/j.conbuildmat.2012.07.064
10. Pinto, J.; Vieira, J.; Pereira, H.; Jacinto, C.; Vilela, P.; Paiva, A.; Pereira, S.; Cunha, V.; Varum, H. (2012) Corn cob lightweight concrete for non-structural applications. Constr. Build. Mater. 34, 346–351. http://dx.doi.org/10.1016/j.conbuildmat.2012.02.043
11. Momtazic, A.S.; Torkamana, J.; Ashorib, A. (2014) Using wood fiber waste, rice husk ash, and limestone powder waste as cement replacement materials for lightweight concrete blocks. Constr. Build. Mater. 50, 432–436. http://dx.doi.org/10.1016/j.conbuildmat.2013.09.044
12. Demirdag, S.; Ugur, I.; Sarac, S. (2008) The effects of cement/fly ash ratios on the volcanic slag aggregate lightweight concrete masonry units. Constr. Build. Mater. 22 [8], 1730–1735. http://dx.doi.org/10.1016/j.conbuildmat.2007.05.011
13. Bui, L.A.T.; Hwang, C.L.; Chen, C.T.; Lin, K.L.; Hsieh, M.Y (2012) Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete. Constr. Build. Mater. 35, 1056–1062. http://dx.doi.org/10.1016/j.conbuildmat.2012.04.032
14. Tang, C.W.; Chen, H.J.; Wang, S.Y.; Spaulding, J. (2011) Production of synthetic lightweight aggregate using reservoir sediments for concrete and masonry. Cem. Concr. Compos. 33 [2], 292–300. http://dx.doi.org/10.1016/j.cemconcomp.2010.10.008
15. NP EN 772-13 (2012) Methods of test for masonry units. Part 13: Determination of net and gross dry density of masonry units (except for natural stone), Instituto Português de Qualidade, Lisboa (in Portuguese).
16. ASTM C 90-06a (2006) Standard Specification for Loadbearing Concrete Masonry Units, ASTM International.
17. NP EN 772-11 (2002) Methods of test for masonry units. Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units), Instituto Português de Qualidade, Lisboa (in Portuguese).
18. LNEC Report 20/01-NCCt (2001) Experimental assessment of the rain water penetration of an expanded clay masonry – Effect of an accelerated aging, Laboratório Nacional de Engenharia Civil – Departamento de Edifícios, Lisboa, (in Portuguese).
19. NP EN 12371 (2002) Natural stone test methods. Determination of frost resistance, Instituto Português de Qualidade, Lisboa (in Portuguese).
20. BS EN 771-3 (2011) Specification for masonry units. Aggregate concrete masonry units (dense and lightweight aggregates).
21. NP EN 772-1 (2002) Methods of test for masonry units. Part 1: Determination of compressive strength, Instituto Português de Qualidade, Lisboa (in Portuguese).
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2015 Consejo Superior de Investigaciones Científicas (CSIC)
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
© CSIC. Los originales publicados en las ediciones impresa y electrónica de esta Revista son propiedad del Consejo Superior de Investigaciones Científicas, siendo necesario citar la procedencia en cualquier reproducción parcial o total.Salvo indicación contraria, todos los contenidos de la edición electrónica se distribuyen bajo una licencia de uso y distribución “Creative Commons Reconocimiento 4.0 Internacional ” (CC BY 4.0). Puede consultar desde aquí la versión informativa y el texto legal de la licencia. Esta circunstancia ha de hacerse constar expresamente de esta forma cuando sea necesario.
No se autoriza el depósito en repositorios, páginas web personales o similares de cualquier otra versión distinta a la publicada por el editor.