Analysis of thermal process of pozzolan production
DOI:
https://doi.org/10.3989/mc.2004.v54.i274.233Keywords:
pozzolans, fired kaolin clay, metakaoline, thermal process, dehydroxilationAbstract
The objective of this study was evaluated the effect of heat treatment parameters on the pozzolanic activity of natural kaolin clays. The experimental design included three factors: kaolin type, temperature and time. Five types of Colombian kaolin clays were thermally treated from 400 to 1000 °C by 1, 2, and 3 hours. The raw materials and the products obtained were characterized by X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Differential Thermal / Thermo gravimetric Analysis (DTAJ TGA). The pozzolanic activity of thermally treated samples according to chemical and mechanical tests was investigated.
Downloads
Download data is not yet available.
Downloads
Published
2004-06-30
How to Cite
Mejía De Gutiérrez, R., Torres A., J., & Guerrero, C. E. (2004). Analysis of thermal process of pozzolan production. Materiales De Construcción, 54(274), 65–72. https://doi.org/10.3989/mc.2004.v54.i274.233
Issue
Section
Research Articles
License
Copyright (c) 2004 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.