Obtaining a sulfoaluminate belite cement by industrial waste
DOI:
https://doi.org/10.3989/mc.2003.v53.i270.278Keywords:
sulfoaluminate belite clinkers, fly ash, phosphogypsum, hydratationAbstract
Sulfoaluminate belite clinkers by burning raw at moderate temperatures near 1250 °C were synthesized. The used mixtures were made by calcium carbonate blended to two industrial wastes: low calcium fly ash and phosphogypsum. The clinkers were characterised by X-Ray Diffraction (XRD), Infrared Spectroscopy (FTIR) and free lime. The hydraulic behaviour of the obtained cements, by adequate clinkers with 7% of added gypsum, was followed by XRD, scaning electronic microscopy (SEM), FTIR and NMR.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2003 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.