Nanosilica synergy: unveiling the strength and fracture mechanisms in advanced concrete composites
DOI:
https://doi.org/10.3989/mc.2025.381724Keywords:
Ultra-high-performance concrete, Nanosilica, Compressive strength, Fracture behavior, Porosimetry, SEMAbstract
This study explores how nanosilica impacts the mechanical properties and fracture behavior of ultra-high-performance concrete (UHPC). We delved into the role of nanosilica in enhancing pozzolanic reactions and its effects on UHPC’s pore structure. This was investigated using advanced techniques such as scanning electron microscopy and mercury intrusion porosimetry. We prepared UHPC samples with varying nanosilica concentrations, replacing cement by 0 to 7.5%wt, to understand its influence comprehensively. Our findings reveal that higher nanosilica content, while beneficial in some aspects, compromises the self-compacting nature of UHPC. This necessitated conducting slump tests to evaluate workability. Remarkably, the addition of nanosilica led to a reduction in both capillary and macropores, enhancing the density and strength of the concrete. Specifically, a maximum of 5%wt nanosilica addition resulted in a 13% increase in compressive strength. However, this improvement in strength comes with a trade-off. The fracture energy of UHPC decreased by 23.2%, indicating an increase in brittleness due to nanosilica. Interestingly, tensile strength saw a 10.5% increase, primarily attributed to the enhanced formation of the C-S-H gel, a key component for concrete strength. This study illuminates the dual-edged effects of nanosilica in UHPC, presenting a nuanced view of its role in concrete technology and fracture mechanics.
Downloads
References
Zhang Z, Li Z, He J, Shi X. 2023. High-strength engineered cementitious composites with nanosilica incorporated: Mechanical performance and autogenous self-healing behavior. Cem. Concr. Compos. 135:104837. https://doi.org/10.1016/j.cemconcomp.2022.104837
Huseien GF, Shah KW, Sam ARM. 2019. Sustainability of nanomaterials based self-healing concrete: An all-inclusive insight. J. Build. Eng. 23:155-71. https://doi.org/10.1016/j.jobe.2019.01.032
Rai S, Tiwari S. 2018. Nano silica in cement hydration. Mater. Today Proc. 5:9196-202. https://doi.org/10.1016/j.matpr.2017.10.044
Abdelgader HS, Amran M, Kurpinska M, Mosaberpanah MA, Murali G, Fediuk R. 2022. Sustainable concrete made with ashes and dust from different Sources. Woodhead Publishing Series in Civil and Structural Engineering. 2022:451-479. https://doi.org/10.1016/B978-0-12-824050-2.00003-6
European Union. Energy, climate change, environment. https://commission.europa.eu/energy-climate-change-environment_en
Kumar Karri S, Rao GVR, Raju PM. 2015. Strength and durability studies on GGBS Concrete. Int. J. Civ. Eng. 2:34-41. https://doi.org/10.14445/23488352/IJCE-V2I10P106
Wang X, Hou P, Yu J, Zhou X, Cheng X. 2020. The effects of silica fume on C3A hydration. Constr. Build. Mater. 250:118766. https://doi.org/10.1016/j.conbuildmat.2020.118766
Bahedh MA, Jaafar MS. 2018. Ultra high-performance concrete utilizing fly ash as cement replacement under autoclaving technique. Case Stud. Constr. Mater. 9:e00202. https://doi.org/10.1016/j.cscm.2018.e00202
Feng H, Liang J, Guo A, Lv L, Sun Z, Sheikh MN, et al. 2023. Development and design of ultra-high ductile magnesium phosphate cement-based composite using fly ash and silica fume. Cem. Concr. Compos. 137:104923. https://doi.org/10.1016/j.cemconcomp.2022.104923
Lin Chan C, Zhang M. 2023. Effect of limestone on engineering properties of alkali-activated concrete: A review. Constr. Build. Mater. 362. https://doi.org/10.1016/j.conbuildmat.2022.129709
Dong Y, Liu Y, Hu C. 2023. Towards greener ultra-high performance concrete based on highly-efficient utilization of calcined clay and limestone powder. J. Build. Eng. 66:105836. https://doi.org/10.1016/j.jobe.2023.105836
Raza SS, Amir MT, Azab M, Ali B, Abdallah M, El Ouni MH, et al. 2022. Effect of micro-silica on the physical, tensile, and load-deflection characteristics of micro fiber-reinforced high-performance concrete (HPC). Case Stud. Constr. Mater. 17:e01380. https://doi.org/10.1016/j.cscm.2022.e01380
Safdar Raza S, Ali B, Noman M, Fahad M, Mohamed Elhadi K. 2022. Mechanical properties, flexural behavior, and chloride permeability of high-performance steel fiber-reinforced concrete (SFRC) modified with rice husk ash and micro-silica. Constr. Build. Mater. 359:129520. https://doi.org/10.1016/j.conbuildmat.2022.129520
Patil S, Sudarsana Rao H, Ghorpade VG. 2022. The influence of metakaolin, silica fume, glass fiber, and polypropylene fiber on the strength characteristics of high performance concrete. Mater. Today Proc. 80(2):577-586. https://doi.org/10.1016/j.matpr.2022.11.051
Nazar S, Yang J, Amin MN, Khan K, Javed MF, Althoey F. 2023. Formulation of estimation models for the compressive strength of concrete mixed with nanosilica and carbon nanotubes. Dev. Built Environ. 13:100113. https://doi.org/10.1016/j.dibe.2022.100113
Dang VP, Kim DJ. 2023. Effects of nanoparticles on the tensile behavior of ultra-high-performance fiber-reinforced concrete at high strain rates. J. Build. Eng. 63:105513. https://doi.org/10.1016/j.jobe.2022.105513
Li M, Sun J, Li L, Meng L, Wang S, Wei J, et al. 2023. Effect of nanosilica on fiber pullout behavior and mechanical properties of strain hardening ultra-high performance concrete. Constr. Build. Mater. 367:130255. https://doi.org/10.1016/j.conbuildmat.2022.130255
Li G, Liu Q, Niu M, Cao L, Nan B, Shi C. 2020. Characteristic of silica nanoparticles on mechanical performance and microstructure of sulphoaluminate cement/ordinary Portland cement binary blends. Constr. Build. Mater. 242:118158. https://doi.org/10.1016/j.conbuildmat.2020.118158
Chithra S, Senthil Kumar SRR, Chinnaraju K. 2016. The effect of colloidal nano-silica on workability, mechanical and durability properties of high performance concrete with copper slag as partial fine aggregate. Constr. Build. Mater. 113:794-804. https://doi.org/10.1016/j.conbuildmat.2016.03.119
Varisha, Zaheer MM, Hasan SD. 2021. Mechanical and durability performance of carbon nanotubes (CNTs) and nanosilica (NS) admixed cement mortar. Mater. Today Proc. 42(2):1422-1431. https://doi.org/10.1016/j.matpr.2021.01.151
Hou P, Wang X, Zhou X, Cheng X, Shah SP. 2022. Regulations on the hydration, morphology, and sulfate-attack resistivity of C3A with micro/nano-silica particles. Constr. Build. Mater. 324:126388. https://doi.org/10.1016/j.conbuildmat.2022.126388
Yu R, Spiesz P, Brouwers HJH. 2014. Effect of nano-silica on the hydration and microstructure development of Ultra-High Performance Concrete (UHPC) with a low binder amount. Constr. Build. Mater. 65:140-50. https://doi.org/10.1016/j.conbuildmat.2014.04.063
Khaloo A, Mobini MH, Hosseini P. 2016. Influence of different types of nano-SiO2 particles on properties of high-performance concrete. Constr. Build. Mater. 113:188-201. https://doi.org/10.1016/j.conbuildmat.2016.03.041
Said AM, Zeidan MS, Bassuoni MT, Tian Y. 2012. Properties of concrete incorporating nano-silica. Constr. Build. Mater. 36:838-844. https://doi.org/10.1016/j.conbuildmat.2012.06.044
Oh T, You I, Banthia N, Yoo DY. 2021. Deposition of nanosilica particles on fiber surface for improving interfacial bond and tensile performances of ultra-high-performance fiber-reinforced concrete. Compos. Part B Eng. 221:109030. https://doi.org/10.1016/j.compositesb.2021.109030
Massana J, Reyes E, Bernal J, León N, Sánchez-Espinosa E. 2018. Influence of nano- and micro-silica additions on the durability of a high-performance self-compacting concrete. Constr. Build. Mater. 165:93-103. https://doi.org/10.1016/j.conbuildmat.2017.12.100
Li H, Xiao HG, Yuan J, Ou J. 2004. Microstructure of cement mortar with nano-particles. Compos. Part B Eng. 35:185-189. https://doi.org/10.1016/S1359-8368(03)00052-0
Barbhuiya GH, Moiz MA, Hasan SD, Zaheer MM. 2020. Effects of the nanosilica addition on cement concrete: A review. Mater. Today Proc. 32:560-566. https://doi.org/10.1016/j.matpr.2020.02.143
Gadag PR, Ghorpade VG, Rao HS. 2022. Evaluation of strength parameters of ultra-fine flyash and nanosilica incorporated High-Performance Concrete. Mater. Today Proc. 49(5):2288-2296. https://doi.org/10.1016/j.matpr.2021.09.344
Mobini MH, Khaloo A, Hosseini P, Esrafili A. 2015. Mechanical properties of fiber-reinforced high-performance concrete incorporating pyrogenic nanosilica with different surface areas. Constr. Build. Mater. 101(1):130-140. https://doi.org/10.1016/j.conbuildmat.2015.10.032
Sikora P, Rucinska T, Stephan D, Chung SY, Abd Elrahman M. 2020. Evaluating the effects of nanosilica on the material properties of lightweight and ultra-lightweight concrete using image-based approaches. Constr. Build. Mater. 264:120241. https://doi.org/10.1016/j.conbuildmat.2020.120241
Ren J, Lai Y, Gao J. 2018. Exploring the influence of SiO2 and TiO2 nanoparticles on the mechanical properties of concrete. Constr. Build. Mater. 175:277-285. https://doi.org/10.1016/j.conbuildmat.2018.04.181
Shih JY, Chang TP, Hsiao TC. 2006. Effect of nanosilica on characterization of Portland cement composite. Mater. Sci. Eng. A. 424(1,2):266-74. https://doi.org/10.1016/j.msea.2006.03.010
Thanmanaselvi M, Ramasamy V. 2021. A study on durability characteristics of nano-concrete. Mater. Today Proc. 80(3):2360-2365. https://doi.org/10.1016/j.matpr.2021.06.349
Wang Y, Zeng D, Ueda T, Fan Y, Li C, Li J. 2021. Beneficial effect of nanomaterials on the interfacial transition zone (ITZ) of non-dispersible underwater concrete. Constr. Build. Mater. 293:123472. https://doi.org/10.1016/j.conbuildmat.2021.123472
Ren G, Wang J, Wen X, Gao X. 2022. Using sol-gel deposition of nanosilica to enhance interface bonding between sisal fiber and ultra-high performance concrete. Cem. Concr. Compos. 133:104705. https://doi.org/10.1016/j.cemconcomp.2022.104705
Atewi YR, Hasan MF, Güneyisi E. 2019. Fracture and permeability properties of glass fiber reinforced self-compacting concrete with and without nanosilica. Constr. Build. Mater. 226:993-1005. https://doi.org/10.1016/j.conbuildmat.2019.08.029
EN 197-1:2011. Cement - Part 1: Composition, specifications and conformity criteria for common cements.
UNE-EN 12350-2:2020. Testing fresh concrete - Part 2: Slump test.
Wedding P, Kantro D. 1980. Influence of water-reducing admixtures on properties of cement paste-a miniature slump test. Cem. Concr. Aggregates. 2(2):95. https://doi.org/10.1520/CCA10190J
Nguyen Amanjean E, Mouret M, Vidal T. 2019. Effect of design parameters on the properties of ultra-high performance fibre-reinforced concrete in the fresh state. Constr. Build. Mater. 224:1007-1017. https://doi.org/10.1016/j.conbuildmat.2019.07.284
EN-12390-3: 2009. Testing hardened concrete Part 3: Compressive strength of test specimens, AENOR,. Brussels, European Committee for Standarization (CEN): 2009.
RILEM TCM-85. 1985. Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams. Mater. Struct. 18:287-290. https://doi.org/10.1007/BF02472918
Ramachandra Murthy A, Karihaloo BL, Iyer NR, Raghu Prasad BK. 2013. Bilinear tension softening diagrams of concrete mixes corresponding to their size-independent specific fracture energy. Constr. Build. Mater. 47:1160-1166. https://doi.org/10.1016/j.conbuildmat.2013.06.004
Abdalla HM, Karihaloo BL. 2004. A method for constructing the bilinear tension softening diagram of concrete corresponding to its true fracture energy. Mag. Concr. Res. 56(10):597-604. https://doi.org/10.1680/macr.2004.56.10.597
Anglade C, Papon A, Mouret M. 2017. Constitutive parameter identification: An application of inverse analysis to the flow of cement-based suspensions in the fresh state from synthetic data. J. Nonnewton. Fluid Mech. 241:14-25. https://doi.org/10.1016/j.jnnfm.2017.01.005
Ghafari E, Costa H, Júlio E, Portugal A, Durães L. 2014. The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete. Mater. Des. 59:1-9. https://doi.org/10.1016/j.matdes.2014.02.051
Sharkawi AM, Abd-Elaty MA, Khalifa OH. 2018. Synergistic influence of micro-nano silica mixture on durability performance of cementious materials. Constr. Build. Mater. 164:579-88. https://doi.org/10.1016/j.conbuildmat.2018.01.013
Erdem S, Hanbay S, Güler Z. 2018. Micromechanical damage analysis and engineering performance of concrete with colloidal nano-silica and demolished concrete aggregates. Constr. Build. Mater. 171:634-642. https://doi.org/10.1016/j.conbuildmat.2018.03.197
Shahrajabian F, Behfarnia K. 2018. The effects of nano particles on freeze and thaw resistance of alkali-activated slag concrete. Constr. Build. Mater. 176:172-178. https://doi.org/10.1016/j.conbuildmat.2018.05.033
Byung Wan J, Chang Hyun K, Jae Hoon L. 2007. Investigations on the development of powder concrete with nano-SiO2 particles. KSCE J. Civ. Eng. 11:37-42. https://doi.org/10.1007/BF02823370
Behfarnia K, Rostami M. 2017. Effects of micro and nanoparticles of SiO2 on the permeability of alkali activated slag concrete. Constr. Build. Mater. 131:205-213. https://doi.org/10.1016/j.conbuildmat.2016.11.070
Du H, Du S, Liu X. 2014. Durability performances of concrete with nano-silica. Constr. Build. Mater. 73:705-712. https://doi.org/10.1016/j.conbuildmat.2014.10.014
Elices M, Guinea GV, Planas J. 1992. Measurement of the fracture energy using three-point bend tests: Part 3- Influence of cutting the P-δ tail. Mater. Struct. 25:327-334. https://doi.org/10.1007/BF02472591
Planas J, Elices M, Guinea G V. 1992. Measurement of the fracture energy using three-point bend tests: Part 2-Influence of bulk energy dissipation. Mater. Struct. 25:305-312. https://doi.org/10.1007/BF02472671
Guinea GV, Planas J, Elices M. 1992. Measurement of the fracture energy using three-point bend tests: Part 1- Influence of experimental procedures. Mater. Struct. 25:212-218. https://doi.org/10.1007/BF02473065
Ríos JD, Leiva C, Ariza MP, Seitl S, Cifuentes H. 2019. Analysis of the tensile fracture properties of ultra-high-strength fiber-reinforced concrete with different types of steel fibers by X-ray tomography. Mater. Des. 165:107582. https://doi.org/10.1016/j.matdes.2019.107582
Al-Azzawi BS, Karihaloo BL. 2017. Flexural fatigue behavior of a self-compacting ultrahigh performance fiber-reinforced concrete. J. Mater. Civ. Eng. 29(11):04017210. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002051
Zheng Y, Zhuo J, Zhang P. 2021. A review on durability of nano-SiO2 and basalt fiber modified recycled aggregate concrete. Constr. Build. Mater. 304:124659. https://doi.org/10.1016/j.conbuildmat.2021.124659
Bahmani H, Mostofinejad D. 2022. Microstructure of ultra-high-performance concrete (UHPC) - A review study. J. Build. Eng. 50:104118. https://doi.org/10.1016/j.jobe.2022.104118
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
Funding data
Ministerio de Ciencia e Innovación
Grant numbers PID2019-110928RB-C31;PID2019-110928RB-C32;PID2019-110928RB-C33;PID2023-147971OB-C31;PID2023-147971OB-C32;PID2023-147971OB-C33
