A probabilistic model for failure design of glass plates in buildings

Alfonso Fernández Canteli; Isabel Viña OLay; Antonio Bernardo Sánchez

doi:10.3989/mc.1996.v46.i242-243.529

A probabilistic model for failure design of glass plates in buildings

Authors

Alfonso Fernández Canteli Dpto. de Construcción e Ingeniería de Fabricación, E.T.S. de Ingenieros Industriales. Universidad de Oviedo
Isabel Viña OLay Dpto. de Construcción e Ingeniería de Fabricación, E.T.S. de Ingenieros Industriales. Universidad de Oviedo
Antonio Bernardo Sánchez Dpto. de Construcción e Ingeniería de Fabricación, E.T.S. de Ingenieros Industriales. Universidad de Oviedo

DOI:

https://doi.org/10.3989/mc.1996.v46.i242-243.529

Abstract

A model for the design of glass plates to failure is presented, which, based on the theory of plates with gross deformations for the calculation of the stress state as well as on the empirical flaws statistical distribution in the glass surface, applies fracture Mechanics criteria to establish a probabilistic prediction of failure. The validity of the model has been experimentally proved for plates with different thicknesses and geometric characteristics.

Downloads

Download data is not yet available.

Downloads

Published

1996-06-30

How to Cite

Fernández Canteli, A., Viña OLay, I., & Bernardo Sánchez, A. (1996). A probabilistic model for failure design of glass plates in buildings. Materiales De Construcción, 46(242-243), 47–60. https://doi.org/10.3989/mc.1996.v46.i242-243.529

Download Citation

Issue

Vol. 46 No. 242-243 (1996)

Section

Research Articles

License

This work is licensed under a Creative Commons Attribution 4.0 International License.

© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.

All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.

Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.