La adherencia en los morteros de albañilería
DOI:
https://doi.org/10.3989/mc.1995.v45.i240.546Keywords:
Bond, mortars, bricklayingAbstract
The work presents a study carried out to determine the bond strength reached by bricklaying mortars at 28 days. 23 different dosages were prepared using 4 cement types, 2 sand types and 4 aggregate types. The results prove the feasibility of using the mentioned method to determine bond strength. The values at 28 days reached up to 0.7 MPa.
Downloads
Download data is not yet available.
Downloads
Published
1995-12-30
How to Cite
Cabrera, J. L. (1995). La adherencia en los morteros de albañilería. Materiales De Construcción, 45(240), 47–52. https://doi.org/10.3989/mc.1995.v45.i240.546
Issue
Section
Research Articles
License
Copyright (c) 1995 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.
