Reactivity of high alumina cement in water: Pore solution and solid phase characterization
DOI:
https://doi.org/10.3989/mc.1992.v42.i228.697Keywords:
pore-solution, high alumina cement (hac), hydration reaction, chemical compositionAbstract
The hydration reaction of high alumina cement at a temperature of 20 ºC and water/cement ratio of 0.5 has been studied over a period of one month. The changes of the solid phase were followed by X-ray diffraction and thermal analysis. Besides, pore-solution was expressed by application of high mechanical pressure (500 MPa) during different periods of the reaction in order to study its Chemical composition evolution as a result of the hydration process.
Downloads
Download data is not yet available.
Downloads
Published
1992-12-30
How to Cite
Gaztañaga, M. T., Goñi, S., & Sagrera, J. L. (1992). Reactivity of high alumina cement in water: Pore solution and solid phase characterization. Materiales De Construcción, 42(228), 65–78. https://doi.org/10.3989/mc.1992.v42.i228.697
Issue
Section
Research Articles
License
Copyright (c) 1992 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.