Factorial Design in Cement Raw Mix Reactivity Investigation
DOI:
https://doi.org/10.3989/mc.1989.v39.i216.792Abstract
The present paper corroborates, that experimental design technics are applicable to raw mix burnability investigations, and with it the obtained results could cover all the range of possible concentrations of industrial interest. Obtained results agree with theory. A negative interaction was found between lime saturation factor (LSF) and silicate module (Ms) in raw mix burnability and in cement reactivity. In the concentration range studied, working with high LSF and low Ms is recommended.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1989 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.