Contribución al análisis y estudio de las posibilidades de variación de la cantidad de yeso, CaSO4.2 H2O, como agresivo, del método acelerado de ensayo ASTM C 452. Parte I A
DOI:
https://doi.org/10.3989/mc.1988.v38.i209.848Abstract
This research work, which will include four publications, was done as a result of the discussions, doubts and controversies which were originated some time ago about the ASTM C 452 method and specially on its 7.0% SO3 content. To clarify this two portland cements P-1 (14.11% C3A) and P-31 (7.62% C3), all it industriéis, were tested and a pozzolanic cement PUZ-8, by the ASTM C 452-68 method, but using gypsum, CaSO4. 2 H2O, with aggressive contents of 5.0%, 7.0%, 10.0%, 12.0% and 14.0% SO3, respectiverly. The determined parameters in the correspondent specimens, in this part IA, were ΔL (%) and [ΔL (%)/g. cement]. This first part IA contains the experimental results obtained mainly and the corresponding discussion. As result of this the concept ANSWER of the determined parameter is proposed.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1988 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.