Application of the fluorescence light microscopy in the textural study of portland cement clinker
DOI:
https://doi.org/10.3989/mc.1987.v37.i205.875Abstract
The application of fluorescence light microscopy in the textural study of Portland cement clinker, specially its porosity, is presented. Principles and types of the technique are commented and the suggested sample preparation method is described. The use of fluorescence microscopy allows an easier study of the clinker porosity, and very proper images for automated quantification can be obtained. Besides, the samples can also be observed by reflected-light polarizing microscopy.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1987 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read here the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.