Arenas calizas para la confección de hormigones: influencia de sus finos calizos y arcillosos a nivel de morteros
For the purpose to obtain data for a next revision of the Spanish Concrete Norm about the content of fines in sands fixed to date on 5 % without exceptions, an exhaustive research project has been undertaken. Following, the results of the influence of different contents of calcareous and clayey fines in mortar mechanical properties, are shown, first step to begin the study of this influence on concretes made with limestone aggregate, presently in execution phase. Before those experimental works, a general survey at all the limestone aggregate quarries in northern area of the peninsula corresponding to the Basque Country, was accomplished. By the results obtained it seems that it will be possible to enlarge the limit untill 12-15%, if only a limited presence of clay is assured.
How to Cite
Copyright (c) 1985 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.