Realce textural mediante "desbaste iónico" de muestras pulidas de clínker de cemento portland para estudios por microscopía electrónica de "scanning"
Results of using "ion thinning" techniques as final stage in the preparation of polished samples of portland cement clinker for SEM studies are showed. Under proper conditions, flat and clean surfaces are obtained which allow to discriminate textural facts (grain size, form, etc.), hardly to see on conventional polished samples due to the similarities of the secondary electron emission of the clinker minerals.
Download data is not yet available.
How to Cite
Rodríguez Rey, Ángel, & de Llanos González, C. (1985). Realce textural mediante "desbaste iónico" de muestras pulidas de clínker de cemento portland para estudios por microscopía electrónica de "scanning". Materiales De Construcción, 35(198), 7–14. https://doi.org/10.3989/mc.1985.v35.i198.921
Copyright (c) 1985 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.