Proyecto para la construcción de un precalentador de lecho fluidizado para un horno piloto de laboratorio
DOI:
https://doi.org/10.3989/mc.1984.v34.i193.958Abstract
A preheater with fluidized bed is planned on a pilot scale, capable of being fitted to a rotatory furnace, also of a pilot nature, for the manufacture of Portland clinker. With this it is intended to design a system of dynamic simulation of clinkerization, to obtain clinker of similar characteristics to those which are obtained industrially.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 1984 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the print and online versions of this journal are the property of the Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.
All contents of this electronic edition, except where otherwise noted, are distributed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence. You may read the basic information and the legal text of the licence. The indication of the CC BY 4.0 licence must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the final version of the work produced by the publisher, is not allowed.
