Performance of alkaline activated slag at high temperatures
DOI:
https://doi.org/10.3989/mc.2004.v54.i276.257Keywords:
alkaline activated slag, refractory materials, fire resistance, alternative cementsAbstract
This paper presents an investigation into the performance of alkali-activated slag (AAS) mortar exposed to elevated temperatures. Sodium silicate, sodium hydroxide and a mix (waterglass) with a modulus (SiO2/Na20) of 1.5 were used as activators. The specimens were heated in an electric furnace up to 1000 ºC in steps of 200 ºC for a constant period of 2 hours. The weight loss, residual compressive strength, resistance to chloride ion penetration, porosity and capillary sorption were evaluated and the results were compared with those of ordinary and blended Portland cement mortar
Downloads
Download data is not yet available.
Downloads
Published
2004-12-30
How to Cite
Mejía de Gutiérrez, R., Maldonado, J., & Gutiérrez, C. (2004). Performance of alkaline activated slag at high temperatures. Materiales De Construcción, 54(276), 87–92. https://doi.org/10.3989/mc.2004.v54.i276.257
Issue
Section
Research Articles
License
Copyright (c) 2004 Consejo Superior de Investigaciones Científicas (CSIC)
This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.