Precisiones sobre la corrosión del acero en contacto con hormigón
DOI:
https://doi.org/10.3989/mc.1982.v32.i187.1011Abstract
In this paper, we emphasize that now it is possible to use some electrochemical non-destructive techniques for measuring the corrosion rate of the metals. Also, it is possible to use the gravimetric determinations if the appropriate instrumentation is not available. The simple visual observation is a good complementary technique but it must not be used alone because of its subjectivity. Also, we stress some aspects, such as the influence of the alkalinity and the humidity, about the corrosion, that the bare and galvanized steel, can suffer in contact with construction materials. We analyze mainly, the influence of the type of cement on the risk of corrosion of both kinds of metals.
Downloads
Download data is not yet available.
Downloads
Published
1982-09-30
How to Cite
Andrade, C. (1982). Precisiones sobre la corrosión del acero en contacto con hormigón. Materiales De Construcción, 32(187), 55–66. https://doi.org/10.3989/mc.1982.v32.i187.1011
Issue
Section
Research Articles
License
Copyright (c) 1982 Consejo Superior de Investigaciones Científicas (CSIC)

This work is licensed under a Creative Commons Attribution 4.0 International License.
© CSIC. Manuscripts published in both the printed and online versions of this Journal are the property of Consejo Superior de Investigaciones Científicas, and quoting this source is a requirement for any partial or full reproduction.All contents of this electronic edition, except where otherwise noted, are distributed under a “Creative Commons Attribution 4.0 International” (CC BY 4.0) License. You may read here the basic information and the legal text of the license. The indication of the CC BY 4.0 License must be expressly stated in this way when necessary.
Self-archiving in repositories, personal webpages or similar, of any version other than the published by the Editor, is not allowed.