Evaluation of the behavior of brick tile masonry and mortar due to capillary rise of moisture

Authors

  • M. S. Camino Universidad de Valladolid
  • F. J. León Universidad de Valladolid
  • A. Llorente Universidad de Valladolid
  • J. M. Olivar Universidad de Valladolid

DOI:

https://doi.org/10.3989/mc.2014.02513

Keywords:

Brick, Brickwork, Rising damp, Absorption, Thermography

Abstract


For a better understanding of the behaviour of old brick masonry in facing the rising damp problem, multiple tests were made in the laboratory: water absorption, moisture content, apparent porosity, temperature and thermal camera imaging on brick masonry and its components: brick and mortar. This has allowed us to determine which of the previous tests is the best in predicting the behaviour of a real wall. In addition, the tests have also helped in defining a process to evaluate the moisture content of walls in a buildings, which is important for heritage restoration projects.

Downloads

Download data is not yet available.

References

Mason G. (1974) Rising damp, Build SCI 9, 227–231. http://dx.doi.org/10.1016/0007-3628(74)90021-8

Hall, C.; Hoff, W.D. (2007) Rising damp: capillary rise dynamics in walls, Proceedings of The Royal Society A-Mathematical Physical And Engineering Sciences 463, 1871–1884. http://dx.doi.org/10.1098/rspa.2007.1855

Rirsch, E.; Zhang, Z. (2010) Rising damp in masonry walls and the importance of mortar properties, Construc. Build. Mat. 24, 1815–1820. http://dx.doi.org/10.1016/j.conbuildmat.2010.04.024

Peixotode Freitas, V.; Torres, M.I.; Guimarães, A.S. (2008) Humidade Ascensional, 106, Faculdade de Engenharia da Universidade do Porto, Porto.

Torres, I.; Peixoto de Freitas, V. (2010) The influence of the thickness of the walls and their properties on the treatment of rising damp in historic buildings, Construc. Build. Mat 24, 1331–1339. http://dx.doi.org/10.1016/j.conbuildmat.2010.01.004

Peixoto, V. (2012) Tratamiento da humidade ascensional em edifícios antigos, 4° Congreso de patología y rehabilitación de edificios. PATORREB 2012, 40.

De Villanueva, J. (1827) Arte de Albañilería o instrucciones para los jóvenes que se dediquen a él, en que se trata de las herramientas necesarias al albañil, formación de andamios, y toda clase de fábricas que se puedan ofrecer, Madrid. Norma UNE EN 772-16 (2001) Método de ensayo para piezas de fábrica de albañilería. Parte 16: determinación de las dimensiones.

UNE EN 772-13 (2001) Método de ensayo de piezas para fábrica de albañilería. Parte 13: Determinación de la densidad absoluta seca y de la densidad aparente seca de piezas para fábrica de albañilería (excepto piedra natural).

UNE EN 772-3 (1999) Método de ensayo para piezas de fábrica de albañilería. Parte 3: Determinación del volumen neto y del porcentaje de huecos por pesada hidrostática de piezas de arcilla cocida para fábrica de albañilería.

Camino M.S.; León F.J.; Llorente A.; Olivar J.M. (2012) Propuesta de ensayo para evaluar las barreras químicas para evitar la subida del agua del terreno en fábrica, 4° Congreso de patología y rehabilitación de edificios. PATORREB 2012, 163.

Fort, R.; Álvarez de Buergo, M.; López de Azcona, M.; Mingarro, F.; Varas, M.; Soriano, J. (2004) Caracterización de la Fábrica de Ladrillo del Palacio del Infante Don Luis, Boadilla del Monte, Madrid, Boletín de la Sociedad Española de Cerámica y Vidrio, 43 [2], 578–582. http://dx.doi.org/10.3989/cyv.2004.v43.i2.599

Setti, M.; Lanfranchi, A.; Cultrone, G.; Marinoni, L. (2012) Archaeometric investigation and evaluation of the decay of ceramic materials from the church of Santa Maria del Carmine (Pavia, Italy), Mater. Construcc. 62, [305], 79–98. http://dx.doi.org/10.3989/mc.2011.62310

Published

2014-03-30

How to Cite

Camino, M. S., León, F. J., Llorente, A., & Olivar, J. M. (2014). Evaluation of the behavior of brick tile masonry and mortar due to capillary rise of moisture. Materiales De Construcción, 64(314), e020. https://doi.org/10.3989/mc.2014.02513

Issue

Section

Research Articles