Mechanical characteristics of concrete with recycled aggregates coming from prefabricated discarded units

Authors

  • J. A. Pérez-Benedicto Escuela Universitaria Politécnica La Almunia (EUPLA), Universidad de Zaragoza, La Almunia
  • M. del Río-Merino Escuela Universitaria de Arquitectura Técnica, Universidad Politécnica de Madrid
  • J. L. Peralta-Canudo Escuela Universitaria Politécnica La Almunia (EUPLA), Universidad de Zaragoza, La Almunia
  • M. de la Rosa-La Mata Laboratorio Arco Tecnos, Zaragoza

DOI:

https://doi.org/10.3989/mc.2011.62110

Keywords:

Recycled aggregate, concrete, proportion, mechanical strength, waste

Abstract


The need to diminish the final amount of waste produced in construction and demolition processes in plants of concrete prefabricated products, has made us analyze the mechanical behaviour of concrete made with recycled aggregate coming from discarded concrete prefabricated units. The aim was to find a possible use for this recycled aggregate in different proportions in reinforced concrete and prestressed concrete, for prefabricated elements. Two situations using recycled aggregate have been studied: one of them, in natural state and subject to pre-saturation with selfcompacting H40 and H50 concrete, using as the only variable the substitution of the 4/12mm coarse aggregate in the following percentages: 0%, 20%, 50% and 100%. The results of the tests performed indicate that concretes with recycled aggregate coming from discarded prefabricated units can offer an excellent quality as structural concrete for future uses.

Downloads

Download data is not yet available.

References

(1) González-Fonteboa B, Martínez-Abella F.: "Hormigones con áridos reciclados: estudio de propiedades de los áridos y de las mezclas", Materiales de Construcción, Vol 55, nº279 (2005), pp 53-66.

(2) Pérez I, Toledano M, Gallego J, Taibo J.: "Propiedades mecánicas de mezclas bituminosas en caliente fabricadas con áridos reciclados de residuos de construcción y demolición", Materiales de Construcción, Vol 57, nº 285 (2007), pp. 17-29.

(3) Rolón Aguilar JC, Nieves Mendoza D, Huete Fuertes R, Blandón González B, Terán Gilmore A.: "Caracterización del hormigón elaborado con áridos reciclados producto de la demolición de estructuras de hormigón", Materiales de Construcción, Vol 57, nº 288 (2007), pp. 5-15.

(4) Domingo A, Lázaro C, Gayarre F, Serrano M, López-Colina C.: "Long term deformations by creep and shrinkage in recycled aggregate concrete", Materials and Structures, Vol 47, nº8 (2009), pp. 1147-1160.

(5) Sánchez de Juan M, Alaejos Gutiérrez MP.: "Estudio sobre la utilización de árido reciclado para la fabricación de hormigón estructural". Madrid: Centro de Publicaciones Secretaria General Técnica Ministrio de Fomento; (2004).

(6) Gomes M, de Brito J.: "Structural concrete with incorporation of coarse recycled concrete and ceramic aggregates: durability performance", Materials and Structures, Vol 42, nº5 (2009), pp. 663-675. http://dx.doi.org/10.1617/s11527-008-9411-9

(7) Limbachiya M, Leelawat T, Dhir R.: "Use of recycled concrete aggregate in high-strength concrete", Materials and Structures, Vol 33 (2000), pp. 574-580. http://dx.doi.org/10.1007/BF02480538

(8) Poon CS, Kou S, Lam L.: "Influence of recycled aggregate on slump and bleeding of fresh concrete", Materials and Structures, Vol 40, nº9 (2007), pp. 981-988. http://dx.doi.org/10.1617/s11527-006-9192-y

(9) III Congreso de ACHE de puentes y estructuras. "Las estructuras del siglo XXI, sostenibilidad, innovación y retos del futuro. influencia del árido reciclado en las propiedades del hormigon estructural".; (2005), pp 4.

(10) Asociación Científico Técnica del Hormigón Estructural.: "Utilización de árido reciclado para la fabricación de hormigón estructural", Madrid, pp 45 (2006)

(11) Thomas C, Carrascal I, Setién J, Polanco JA.: "Determinación del límite a fatiga en hormigones reciclados de aplicación estructural", Anales de Mecánica de la Fractura, Vol 1(26) (2009), pp 283-288.

(12) Chakradhara Rao M, Bhattacharyya S, Barai S.: "Influence of field recycled coarse aggregate on properties of concrete", Materials and Structures,(en linea). Disponible en: http://www.springerlink.com/content/x88870w520843h47/ (2010, 6 de Mayo).

(13) Etxeberria M, Vázquez E, Marí A, Barra M.: "Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete", Cement and Concrete Research, Vol 37(5), (2007), pp. 735-742 http://dx.doi.org/10.1016/j.cemconres.2007.02.002

(14) Parra y Alfaro JL, Castilla J, Palacios P, Puchol L.: "Áridos reciclados para hormigón. Prueba industrial", Jornadas Nacionales sobre aplicaciones arquitectónicas de materiales, ETS de Arquitectura, Madrid, 2003.

Downloads

Published

2012-03-30

How to Cite

Pérez-Benedicto, J. A., del Río-Merino, M., Peralta-Canudo, J. L., & de la Rosa-La Mata, M. (2012). Mechanical characteristics of concrete with recycled aggregates coming from prefabricated discarded units. Materiales De Construcción, 62(305), 25–37. https://doi.org/10.3989/mc.2011.62110

Issue

Section

Research Articles

Most read articles by the same author(s)