Effect of the strontium aluminate and hemihydrate contents on the properties of a calcium sulphoaluminate based cement

Authors

  • G. Velazco Cinvestav Saltillo
  • J. M. Almanza Cinvestav Saltillo
  • D. A. Cortés Cinvestav Saltillo
  • J. C. Escobedo Cinvestav Saltillo
  • J. I. Escalante-Garcia Cinvestav Saltillo

DOI:

https://doi.org/10.3989/mc.2014.04413

Keywords:

Strontium aluminate, Ettringite, Sulphoaluminate

Abstract


The effect of strontium aluminate (SrAl2O4) on the hydration process of a calcium sulphoaluminate (C4A3Ŝ) cement was investigated. Cement pastes were prepared by mixing C4A3Ŝ , hemihydrate (CaSO4· ½H2O, CŜH0.5) and 0, 10 or 20wt% of SrAl2O4 (SrA). The amount of CŜH0.5 was 15, 20 or 25wt% based on the C4A3Ŝ quantity. The cement pastes were hydrated using water to cement ratios (w/c) of 0.4 and 0.5. Samples were cured from 1 to 28 d. The compressive strength and setting time were evaluated and the hydration products were characterized. It was found that the setting time was delayed up to 42 min for the samples containing SrAl2O4 compared to samples without addition. The samples with 25wt% hemihydrate containing 20wt% SrAl2O4 developed the highest compressive strength (60 MPa) after 28 d of curing. The main product after hydration was ettringite (C63H32). The morphology of this phase consisted of thin needle-shaped crystals.

Downloads

Download data is not yet available.

References

1. Odler, I. (2000) Special inorganic cements, E & FN SPON, London.

2. Juenger, M.C.G.; Winnefeld, F. (2011) Advances in alternative cementitius binders. Cem. Concr. Res., 41 [12], 1232–1243. http://dx.doi.org/10.1016/j.cemconres.2010.11.012

3. Propescu, C.D. (2003) Industrial trial production of low energy belite cement. Cem. Concr. Comp., 25 [7], 689–693. http://dx.doi.org/10.1016/S0958-9465(02)00097-5

4. Aranda, M.A.G.; De la Torre, A.G. (2013) Sulfoaluminate cement, Ed. Pacheco-Torgal, F., Jalali, S., Labrincha, J., John, V. M. (Eds.), Eco-efficient concrete, Cambridge.

5. Saju, S.; Majling, J. (1993) Phase compatibility in the system CaO-SiO2-Al2O3-Fe2O3-SO3 referred to sulphoaluminate belite cement clinker. Cem. Concr. Res., 23 [6], 1331–1339. http://dx.doi.org/10.1016/0008-8846(93)90070-P

6. Quillin, K. (2001) Performance of belite-sulfoaluminate cements. Cem. Concr. Res., 31 [9], 1341–1349. http://dx.doi.org/10.1016/S0008-8846(01)00543-9

7. Klein, A. (1965) Formation of Ettringite by Hydration of a System Containing an Anhydrous Calcium Sulfoaluminate. J. Am. Cer. Soc., 48 [8], 435–436. http://dx.doi.org/10.1111/j.1151-2916.1965.tb14786.x

8. De la Torre, A.G.; Cuberos, A.J.M. et al. (2011) In situ powder diffraction study of belite sulfoaluminate clinkering. Journal of Synchrotron Radiation, 18 [3], 506–514. http://dx.doi.org/10.1107/S0909049511005796 PMid:21525661

9. Glasser, F.P.; Zhang, L. (2001) High-performance cement matrices based on calcium sulfoaluminate–belite compositions. Cem. Concr. Res., 31 [12], 1881–1886. http://dx.doi.org/10.1016/S0008-8846(01)00649-4

10. Arjunan, P. (1999) Sulfoaluminate-belite cement from low- calcium fly ash and sulfur rich and other industrial by-products. Cem. Concr. Res., 29 [8], 1305–1309. http://dx.doi.org/10.1016/S0008-8846(99)00072-1

11. Winnefeld, F. (2010) Hydration of calcium sulphoaluminate cements experimental findings and thermodinamic modeling. Cem. Concr. Res., 40 [1], 1239–1247. http://dx.doi.org/10.1016/j.cemconres.2009.08.014

12. Ambroise, P.J. (2004) New applications of calcium sulfoaluminate cement. Cem. Concr. Res., Vol. 34 [4], 671–676. http://dx.doi.org/10.1016/j.cemconres.2003.10.019

13. Havlica, S.S. (1991) Hydration behaviour of sulphoaluminate belite cement in the presence of various calcium sulphates. Thermochimica Acta, 175 [1], 45–52. http://dx.doi.org/10.1016/0040-6031(91)80244-D

14. Hargis, C.; Kircheim, A. (2013) Early hydration of calcium sulfoaluminato (synthetic ye'elemite, C4A3S^) in the presence of gypsum and varying amounts of calcium hydroxide. Cem. Concr. Res., 48 [1], 105–115. http://dx.doi.org/10.1016/j.cemconres.2013.03.001

15. Wang, Y.; Su, M. (1994) The third cement series in China. World Cem., 25 [8], 6–10.

16. Zhang, L.; Su, M.; Wang, Y. (1999) Development of the use of sulfo- and ferroaluminate cements in China. Adv. Cem. Res., 11 [1], 15–21. http://dx.doi.org/10.1680/adcr.1999.11.1.15

17. Beretka, J.; Marroccoli, M. (1996) The influence of C4A3S^ content and W/S ratio on the performance of calcium sulfoaluminate-based cements. Cem. Concr. Res., 26 [11], 1673–1681. http://dx.doi.org/10.1016/S0008-8846(96)00164-0

18. Winnefeld, F.; Barlag, S. (2010) Calorimetric and thermogavimetric study on the influence of calcium sulfate on the Figure 6. Micrographs of samples containing 15(a), 20(b) and 25(c)w% of hemihydrate and 20wt% of SrAl2O4 after 28 d of curing hydration of ye'elimite. J. Therm. Anal. Calorim., 101 [3], 949–957. http://dx.doi.org/10.1007/s10973-009-0582-6

19. Evju, C.; Hansen, S. (2001) Expansive properties of ettringite in a mixture of calcium aluminate cement, Portland cement and β-calcium sulfate hemihydrate. Cem. Concr. Res., 31 [2], 257–261. http://dx.doi.org/10.1016/S0008-8846(00)00495-6

20. Braniski, A. (1957) Barium and strontium cements, Zement-Kalk-Gips, 5, 176–184.

21. Chatterjee, A.K. (2009) Re-examining the prospects of aluminous cements based on alkali-earth and rare-earth oxides. Cem. Concr. Res., 39 [11], 981–988. http://dx.doi.org/10.1016/j.cemconres.2009.07.027

22. ASTM C-204, Fineness of Hydraulic Cement by Air Permeability Apparatus, 1995 Annual Book of ASTM Standards. Section 4. Construction. Vol. 04.01. Cement, Lime, Gypsum.

23. BS EN 196-6: 2010. Methods of testing cement. Part 6: Determination of fineness. London, British Standards Institute.

24. ASTM C-191, Test Method for Time of Setting of Hydraulic Cement by Vicat Needle, 1995 Annual Book of ASTM Standards. Section 4. Construction. Volume 04.01. Cement, Lime, Gypsum.

25. BS EN 196-3: 2005. Methods of testing cement. Part 3: Determination of setting and soundness. London, British Standards Institute.

26. ASTM C 150 Standard Specification for Portland cement, 2004 Annual Book of ASTM Standards. Section 4. Construction. Vol. 04.01. Cement, Lime, Gypsum.

27. BS EN 197-1: 2000. Cement. Composition, specifications and conformity criteria for common cements. London, British Standards Institute.

28. Quennoz, A.; Scrivener, K.L. (2012) Hydration of C3A–gypsum systems. Cem. Concr. Res., 42 [7], 1032–1041. http://dx.doi.org/10.1016/j.cemconres.2012.04.005

29. Motzet, H.; Pöllmann, H. (1999) Synthesis and characterisation of sulfite-containing AFm phases in the system CaO-Al2O3-SO2-H2O. Cem. Concr. Res., 29 [7], 1005–1011. http://dx.doi.org/10.1016/S0008-8846(99)00082-4

Published

2014-09-30

How to Cite

Velazco, G., Almanza, J. M., Cortés, D. A., Escobedo, J. C., & Escalante-Garcia, J. I. (2014). Effect of the strontium aluminate and hemihydrate contents on the properties of a calcium sulphoaluminate based cement. Materiales De Construcción, 64(315), e024. https://doi.org/10.3989/mc.2014.04413

Issue

Section

Research Articles