Exploring the potential of cuttlebone waste to produce building lime

E. Ferraz; J. A.F. Gamelas; J. Coroado; C. Monteiro; F. Rocha

doi:10.3989/mc.2020.15819

Autores/as

E. Ferraz Techn&Art, Polytechnic Institute of Tomar - Geobiotec, Department of Geosciences, University of Aveiro https://orcid.org/0000-0003-4717-6305
J. A.F. Gamelas CIEPQPF, Department of Chemical Engineering, University of Coimbra https://orcid.org/0000-0002-1474-767X
J. Coroado Techn&Art, Polytechnic Institute of Tomar - Geobiotec, Department of Geosciences, University of Aveiro https://orcid.org/0000-0001-6743-9278
C. Monteiro CaCO3 - Conservação do Património Artístico https://orcid.org/0000-0002-7141-9090
F. Rocha Geobiotec, Department of Geosciences, University of Aveiro https://orcid.org/0000-0002-3636-3933

DOI:

https://doi.org/10.3989/mc.2020.15819

Palabras clave:

Cal, Carbonato cálcico, Tratamiento de residuos, Hidratación, Caracterización

Resumen

El objetivo de este estudio es encontrar una forma práctica de reciclar los desechos de la jibia en la producción de cal. Se estudió el comportamiento del óxido de calcio obtenido de la calcinación de estos residuos a 900, 1000 y 1100 ºC y, después del apagado húmedo, se caracterizó la cal producida. Todos los resultados se compararon con óxido de calcio o con cal hidratada obtenida de piedra caliza comercial. Según los resultados del apagado, los residuos y la piedra caliza calcinada a 1000 ºC alcanzaron la clase de reactividad R4 (alrededor de 13 minutos para alcanzar los 60 ºC) y R5 (60 ºC en 25 s), respectivamente. Cambiar la temperatura de calcinación a 900 o 1100 ºC no promovió un aumento en la reactividad de los residuos calcinados. Aunque son menos reactivos que la piedra caliza calcinada, la jibia calcinada puede transformarse sin restricciones significativas en cal para construcción, ya que este material de construcción cumple con las especificaciones físico-químicas estándar relevantes.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

Birchall, J.D.; Thomas, N.L. (1983) On the architecture and function of cuttlefish bone. J. Mater. Sci. 18, 2081-2086. https://doi.org/10.1007/BF00555001

Sherrard, K.M. (2000) Cuttlebone morphology limits habitat depth in eleven species of Sepia (Cephalopoda: Sepiidae). Biol. Bull. 198 [3], 404-414. https://doi.org/10.2307/1542696 PMid:10897454

Zhang, X.; Vecchio, K.S. (2013) Conversion of natural marine skeletons as scaffolds for bone tissue engineering. Front. Mater. Sci. 7, 103-117. https://doi.org/10.1007/s11706-013-0204-x

Le Pabic, C.; Rousseau, M.; Bonnaud-Ponticelli, L.; Von Boletzky, S. (2016) Overview of the shell development of the common cuttlefish Sepia officinalis during early-life stages. Vie Milieu - Life Environ. 66 [1], 35-42.

Čadež, V.; Škapin, S.D.; Leonardi, A.; Križaj, I.; Kazazić, S.; Salopek-Sondi, B.; Sondi, I. (2017) Formation and morphogenesis of a cuttlebone's aragonite biomineral structures for the common cuttlefish (Sepia officinalis) on the nanoscale: Revisited. J. Colloid Interface Sci. 508, 95-104. https://doi.org/10.1016/j.jcis.2017.08.028 PMid:28822865

North, L.; Labonte, D.; Oyen, M.L.; Coleman, M.P.; Caliskan, H.B.; Johnston, R.E. (2017) Interrelated chemical-microstructural-nanomechanical variations in the structural units of the cuttlebone of Sepia officinalis. APL Mater. 5, 116103. https://doi.org/10.1063/1.4993202

Cadman, J.; Zhou, S.; Chen, Y.; Li, Q. (2012) Cuttlebone: Characterisation, Application and Development of Biomimetic Materials. J. Bionic Eng. 9, 367-376. https://doi.org/10.1016/S1672-6529(11)60132-7

Sophia, M.; Sakthieswaran, N. (2019) Waste shell powders as valuable bio-filler in gypsum plaster - Efficient waste management technique by effective utilization. J. Cleaner Prod. 220, 74-86. https://doi.org/10.1016/j.jclepro.2019.02.119

Poompradub, S.; Ikeda, Y.; Kokubo, Y.; Shiono, T. (2008) Cuttlebone as reinforcing filler for natural rubber. Eur. Polym. J. 44 [12], 4157-4164. https://doi.org/10.1016/j.eurpolymj.2008.09.015

Shang, S.; Chiu, K.-L.; Yuen, M.C.W.; Jiang, S. (2014) The potential of cuttlebone as reinforced filler of polyurethane. Compos. Sci. Technol. 93, 17-22. https://doi.org/10.1016/j.compscitech.2013.12.019

Soisuwan, S.; Phommachant, J.; Wisaijorn, W.; Praserthdam, P. (2014) The characteristics of green calcium oxide derived from aquatic materials. Procedia Chem. 9, 53-61. https://doi.org/10.1016/j.proche.2014.05.007

Sankaranarayanan, S.; Jindapon, W.; Ngamcharussrivichai, C. (2017) Valorization of biodiesel plant-derived products via preparation of solketal fatty esters over calcium-rich natural materials derived oxides. J. Taiwan Inst. Chem. Eng. 81, 57-64. https://doi.org/10.1016/j.jtice.2017.10.007

Catarino, M.; Ramos, M.; Dias, A.P.S.; Santos, M.T.; Puna, J.F.; Gomes, J.F. (2017) Calcium Rich Food Wastes Based Catalysts for Biodiesel Production. Waste Biomass Valorization. 8, 1699-1707 https://doi.org/10.1007/s12649-017-9988-8

Ngamcharussrivichai, C.; Nunthasanti, P.; Tanachai, S.; Bunyakiat, K. (2010) Biodiesel production through transesterification over natural calciums. Fuel Process. Technol. 91 [11], 1409-1415. https://doi.org/10.1016/j.fuproc.2010.05.014

Castilho, S.; Kiennemann, A.; Pereira, M.F.C.; Dias, A.P.S. (2013) Sorbents for CO2 capture from biogenesis calcium wastes. Chem. Eng. J. 226, 146-153. https://doi.org/10.1016/j.cej.2013.04.017

Dogan, E.; Okumus, Z. (2014) Cuttlebone used as a bone xenograft in bone healing. Vet. Med. 59, 254-260. https://doi.org/10.17221/7519-VETMED

Periasamy, K.; Mohankumar, G.C. (2016) Sea coral-derived cuttlebone reinforced epoxy composites: Characterization and tensile properties evaluation with mathematical models. J. Compos. Mater. 50 [6], 807-823. https://doi.org/10.1177/0021998315581512

FAO - Global Production Statistics 1950-2017. Retreived from http://www.fao.org/fishery/statistics/global-production/query/en. Accessed 15 February 2020.

NP EN 459-1 (2015) Building lime. Part 1: Definitions, specifications and conformity criteria. Instituto Português da Qualidade, Caparica (in portuguese).

Ferraz, E.; Gamelas, J.A.F.; Coroado, J.; Monteiro, C.; Rocha, F. (2019) Recycling waste seashells to produce calcitic lime: characterization and wet slaking reactivity. Waste Biomass Valorization. 10, 2397-2414. https://doi.org/10.1007/s12649-018-0232-y

Ferraz, E.; Gamelas, J.A.F.; Coroado, J.; Monteiro, C.; Rocha, F. (2018) Eggshell waste to produce building lime: calcium oxide reactivity, industrial, environmental and economic implications. Mater. Struct. 51, 115. https://doi.org/10.1617/s11527-018-1243-7

NP EN 459-2 (2011) Building lime. Part 2: Test methods. Instituto Português da Qualidade, Caparica (in portuguese).

Florek, M.; Fornal, E.; Gómez-Romero, P.; Zieba, E.; Paszkowicz, W.; Lekki, J.; Nowak, J.; Kuczumow, A. (2009) Complementary microstructural and chemical analyses of Sepia officinalis endoskeleton. Mat. Sci. Eng., C, 29 [4], 1220-1226. https://doi.org/10.1016/j.msec.2008.09.040

Urmos, J.; Sharma, S.K.; Mackenzie, F.T. (1991) Characterization of some biogenic carbonates with Raman spectroscopy. Am. Mineral. 76, 641-646.

Bellamy, L.J. (1975) The infrared spectra of complex molecules, 3 ed. Chapman and Hall, London.

Estatística da Pesca 2018 (2019) Instituto Nacional de Estatística, Lisboa (in portuguese).

Balti, R.; Bougatef, A.; Ali, N.E.-H.; Zekri, D.; Barkia, A.; Nasri, M. (2010) Influence of degree of hydrolysis on functional properties and angiotensin I-converting enzyme-inhibitory activity of protein hydrolysates from cuttlefish (Sepia officinalis) by-products. J. Sci. Food Agric. 90 [12]. https://doi.org/10.1002/jsfa.4045 PMid:20583200