The fatty acids based organofunctional silane protective coatings for concrete

Authors

DOI:

https://doi.org/10.3989/mc.2021.03420

Keywords:

Fatty acids, Sol-gel processes, Organically modified silanes, Concrete, Protective coatings

Abstract


The possibility of using free fatty acids for the synthesis of new organofunctional silanes is shown. In nature, fatty acids occur in the form of esters with glycerin (fats) and are widely used for production of soap, oil paints, medicines and cosmetics. Of particular interest in this study was the application of organosilicon derivatives of oleic acid for production of coating that would cover the surface of concrete and protect it from water permeation. As a result of proposed silanization, the concrete surface acquired hydrophobic character with the wetting angles up to 115°, and the concrete absorbability was reduced by up to 93%.

Downloads

Download data is not yet available.

References

Dhir, R.K.; Hewlett, P.C.; Chan, Y.N. (1987) Near-surface characteristics of concrete: assessment and development of in situ test methods. Mag. Concr. Res. 39, 183-195. https://doi.org/10.1680/macr.1987.39.141.183

Song, H-W.; Lee, C-H.; Ann, K.Y. (2008) Factors influencing chloride transport in concrete structures exposed to marine environments. Cem. Concr. Compos. 30, 113-121. https://doi.org/10.1016/j.cemconcomp.2007.09.005

Meyer, A. (1987) Importance of the surface layer for the durability of concrete structures. ACI Spec. Publ. 100, 49-62.

Basheer, P.A.M.; Basheer, L.; Cleland, D.J.; Long, A.E. (1997) Surface treatments for concrete: assessment methods and reported performance. Constr. Build. Mater. 11 [7-8], 413-429. https://doi.org/10.1016/S0950-0618(97)00019-6

Doran, D.; Cather, B. (2013) Construction Materials Reference Book, Routledge, Taylor & Francis Group, New York, (2013). https://doi.org/10.4324/9780080940380

Pan, X.; Shi, Z.; Shi, C.; Ling, T-C.; Li, N. (2017) A review on concrete surface treatment Part I: Types and mechanisms. Constr. Build. Mater. 132, 578-590. https://doi.org/10.1016/j.conbuildmat.2016.12.025

Woo, R.S.C.; Zhu, H.; Chow, M.M.K.; Leung, C.K.Y.; Kim, J-K. (2008) Barrier performance of silane-clay nanocomposite coatings on concrete structure. Compos. Sci. Technol. 68 [14], 2828-2836. https://doi.org/10.1016/j.compscitech.2007.10.028

Anderson, R.; Arkles, B.; Larson, G.L. (1987) Silicon compounds register and review, Petrarch Product Catalog, Bristol, (1987).

Attanayaka, U.; Ng, S.Y.C.; Aktan, H. (2002) Criteria and benefits of penetrating sealants for concrete bridge decks, Michigan Department of Transportation, (2002).

A guide to silane solutions from Dow Corning, Dow Corning, (2005).

Petrie, E. (2007) Handbook of adhesives and sealants, McGraw Hill, New York, (2007).

Carter, P.D. (1994) Evaluation of dampproofing performance and effective penetration depth of silane sealers in concrete. ACI Spec. Publ. 151, 95-118.

Christodoulou, C.; Goodier, C.I.; Austin, S.A.; Webb, J.; Glass, G.K. (2013) Long-term performance of surface impregnation of reinforced concrete structures with silane. Constr. Build. Mater. 48, 708-716. https://doi.org/10.1016/j.conbuildmat.2013.07.038

Li, J., Yi, Z., Xie, Y. (2012) Progress of silane impregnating surface treatment technology of concrete structure. Mater. Rev. 26 [3], 120-125.

Pan, X.; Shi, Z.; Shi, C.; Ling, T.-C.; Li, N. (2017) A review on surface treatment for concrete - Part 2: Performance. Constr. Build. Mater. 133, 81-90. https://doi.org/10.1016/j.conbuildmat.2016.11.128

Dai, J-G., Akira, Y., Wittmann, F.H., Yokota, H., Zhang P. (2010) Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments: The role of cracks. Cem. Concr. Comp. 32, 101-109. https://doi.org/10.1016/j.cemconcomp.2009.11.001

Zhan, H., Wittmann, F.H., Zhao, T. (2003). Chloride barrier for concrete in saline environment established by water repellent treatmentt. Restorat. Build. Monum. 9, 535-550. https://doi.org/10.1515/rbm-2003-5792

Wong, H.S.; Barakat, R.; Alhilali, A.; Saleh, M.; Cheeseman, C.R. (2015) Hydrophobic concrete using waste paper sludge ash. Cem. Concr. Res. 70, 9-20. https://doi.org/10.1016/j.cemconres.2015.01.005

Malinowski, R. (1977) Concretes and mortars in ancient aqueducts. In: Hist. Moments Concr. 1, 66-76.

Fiori, C., Vandini, M., Prati, S., Chiavari, G. (2009) Vaterite in the mortars of a mosaic in the Saint Peter Basilica, Vatican (Rome). J. Cult. Herit. 10, 248-257. https://doi.org/10.1016/j.culher.2008.07.011

Lagazzo, A.; Vinci, S.; Cattaneo, C.; Botter, R. (2016) Effect of fatty acid soap on microstructure of lime-cement mortar. Constr. Build. Mater. 116, 384-390. https://doi.org/10.1016/j.conbuildmat.2016.04.122

Nunes, C.; Slížková, Z. (2014) Hydrophobic lime based mortars with linseed oil: Characterization and durability assessment. Cem. Concr. Res. 61-62, 28-39. https://doi.org/10.1016/j.cemconres.2014.03.011

Hewlett, P.C., Liska M. (2019) Lea's Chemistry of Cement and Concrete, Elsevier (2019). https://doi.org/10.1016/B978-0-08-100773-0.00014-9

Cellat, K.; Beyhan, B.; Güngör, C.; Konuklu, Y.; Karahan, O.; Dündar, C.; Paksoy, H. (2015) Thermal enhancement of concrete by adding bio-based fatty acids as phase change materials. Energy Build. 106, 156-163. https://doi.org/10.1016/j.enbuild.2015.05.035

Rozanna, D.; Chuah, T.G.; Salmiah, A.; Choong, T.S.Y.; Sa'ari, M. (2005) Fatty acids as phase change materials (PCMs) for thermal energy storage: a review. Int. J. Green Energy 1, 495-513. https://doi.org/10.1081/GE-200038722

Justnes, H.; Østnor, T.A.; Barnils Vila, N. (2004) Vegetable oils as water repellents for mortars, In: Proceedings of the first international conference of Asian Concrete Federation, Chiang Mai, Thailand; 2, 689-98.

Szubert, K. (2018) Synthesis of organofunctional silane from rapeseed oil and its application as a coating material. Cellulose 25, 6269-6278. https://doi.org/10.1007/s10570-018-2018-6

Szubert, K.; Maciejewski, H. (2017) Corrosion protective agent, PL424015 (A1) (2017).

EN-197-1, Cement - Part 1: Composition, specifications and conformity criteria for common cements, European Committee for Standardization, Brussels, (2011).

Orsavova, J.; Misurcova, L.; Ambrozova, J.V.; Vicha, R.; Mlcek, J. (2015) Fatty acids composition of vegetable oils and its contribution to dietary energy intake and dependence of cardiovascular mortality on dietary intake of fatty acids. Int. J. Mol. Sci. 16, 12871-12890. https://doi.org/10.3390/ijms160612871 PMid:26057750 PMCid:PMC4490476

EN-1062-3, Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability, European Committee for Standardization, Brussels, (2008).

EN-1504-2, Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality assurance and conformity assessment - Part 2: Surface protection systems for concrete, European Committee for Standardization, Brussels, (2004).

Baltazar, L.; Santana, J.; Lopes, B.; Rodrigues, M.P.; Correia, J.R. (2014) Surface skin protection of concrete with silicate-based impregnations: Influence of the substrate roughness and moisture. Constr. Build. Mater. 70, 191-200. https://doi.org/10.1016/j.conbuildmat.2014.07.071

Published

2021-03-10

How to Cite

Szubert, K. . (2021). The fatty acids based organofunctional silane protective coatings for concrete. Materiales De Construcción, 71(341), e238. https://doi.org/10.3989/mc.2021.03420

Issue

Section

Research Articles

Funding data

Narodowym Centrum Nauki
Grant numbers DEC-2013/09/D/ST5/03845